For more details regarding the break-out pins, you can see them at the back of the board. Additionally, the board supports not only the common break-out RX/TX/RTS/CTS pins, but it also breaks out almost all the other pins. The device is a fast USB 2.0 compatible that can work at data transfer rates up to 1 Mbaud. The asynchronous serial data bus of the C02102 USB to UART supports 576 bytes receive buffer and a 640 bytes transmit buffer with hardware handshaking functionality.

The voltage regulator gives a 3.3 V output. It comes with a 1KB programmable ROM along with the one-time programmable EPROM. Talking more about the CP2102 chip, it has an integrated USB transceiver with no additional need for external resistors. These drivers make the USB device appear as an additional COM port available to the system.

These devices can also interface with a host using the direct access driver. The board features the CP2102 chip which belongs to Silicon Labs’ CP210x series dedicated for USB to UART Bridge through virtual COM port drivers that are needed for device functioning to facilitate host communication with CP210x based devices. However, there is no mention of USB Type-C for these devices.ĬP2102 USB to UART is a breakout board supporting USB Type-C. We also saw a USB to UART module based on MCP220 through GPIOs, also compact USB to a UART converter using a CH330 chip with an interface speed of 2Mbps. CP2102 features a USB Type-C plug for this conversion from USB to UART. Also, the USB to UART conversion is crucial for interfacing if the working device only supports a UART port. Most of the devices now come with a USB Type-C for interfacing and connectivity.

Diptrace export slot